• LOGIN
  • No products in the cart.

Base

Bio

Low Floating pontoon
Low Float:
Size500*500*250mm
Weight5.5KGS
MaterialHMWHDPE
Load Capacity220kg/ m2
Available colorBlack, blue, orange, gray
Low Double Float:
Size1000*500*250
Weight8.5KGS
MaterialHMWHDPE
Load Capacity220kg/ m2
Available colorgray, blue

FEATURES OF XINYI DOCK FLOAT:
1.Material
Use the best available HMWHDPE material,with enhanced interlocking design, make the floating structures with HIGH Tensile strength and IZOD impact Strength, material is 100% recyclable and environmental friendly.
2.Durability
Resistant to UV rays, frost, seawater, corrosion, chemicals and oil etc.
Lifespan of Xinyi Dock Float(pontoon) is above 15 years without any maintenance or repair.
3.Safety
With patterns on the top surface, XINYI modular floating system is free from the dangers caused by slippery surfaces, splinters and rusty nails. No sharp corners and is stable to walk on.
4.Load Capacity
High Load Capacity: 220kg/ m2.
5.Economy
Low maintenance, quick assembly & disassembly.
6.Changeability
Can be installed according to requests, one connecting pin holds four modules together–permitting the assembly of any size and any configuration on the water and the assembly can be changed to meet the requirements.
7.Versatility
Can be used widely in various fields, floating dock, drive on dock float, PWC dock, dragon boat dock, floating swimming pool, fish farm cages, work platform, floating platform, restaurant and coffee shops, movable platform, pontoon bridge, floating walkway, etc.
8.Delivery Time
3-10 days
Applications of Xinyi floating dock system:
Floating Dock
Floating Bridge
walkways&platform
Floating House
jet Ski Dock
Floating Fishing Cage
Solar Float
Why Choose Us:
1.Within three years, we can repair it for free
2.No high cost, quick and convenient installation, save time and money
3.Environment-friendly and pollution-free
4.Easy to install and remove
5.Strongest Lug thickness(19mm) provided than other brands
6.Professionalin Floating Dock industry,has been for more than 10 years
7.Installed more than 8000 (small and big) projects all over the world
8.Produced more than 3,000,000 pcs dock floats in passed 10 years
9.Exported to more than 80 countries
10.Various kinds of floats to meet your water project
11.Have a certain amount of stock, short delivery time
12.Large and regular orders are acceptable for you to produce your own Brand/Logo on the float.
FAQ:
1. Is Xinyi Floating Dock Eco-friendly ?
Yes, the material of Xinyi Floating Dock is 100% recyclable, environmental friendly.
2. What is the Lifespan of Xinyi Floating Dock ?
The Lifespan of Xinyi Floating Dock 15-20 years, depending on the usage and site location condition.
3. How to anchor the Xinyi Floating Dock ?
Xinyi Floating Dock offers several anchoring options to keep your floating dock safe and secure in any conditions. Pipes, deadweight anchors, piling brackets, and stiff arms are among the anchoring options available to you.
4. Will the surface of the pontoon become slippery when wet and people will fall down ?
Xinyi Floating Dock have a non-skid texture molded into the dock floats, it will keep people safe when they walking on it.China Floating Pontoon manufacturers
website:http://www.hsfloating.com/floating-pontoon/

Location

http://www.darewaywire.com/

Bio

Product Description
high pressure stainless steel manifolds for gas systems manifold needle valve
Features:
1.Provide maximum service lief and excellent flow control
2.Provides superior corrosion resistance
3.Flange seal and bolts are included
4.Sour gas service option conforms to NACE standard MR0175
5.Manifolds with optional Grafoil packings meet the external leakage requirements
6. Manifolds are 100% factory tested
Specifications:
Ordering Information:China Needle Valve manufacturers
website:http://www.china-flow.com/needle-valve/

Location

http://www.chinaeffectpigment.com/

자기 소개

1.Product name:mineral water cap compression molding machine

2.Product specification:
Main SpecificationUnitCCM-JP24H
Raw MaterialPE/PP
Max. cap nominal diametermm42
Max. cap nominal heightmm25
Max. cap weightg4
Number of cavitiesPCS24
Avg Capacity(3025)PCS /hour35,000
Rated PowerCompression Molding MotorKw/h4
Extruder MotorKw/h15
Hydraulic MotorKw/h22
Extruder Heating BandsKw/h46
Vacuum Pump MotorKw/h3
TotalKw/h90
DimensionCap molding machine (L*W*H)m7x2.7×2.6
Machine WeightT11
Voltage/FrequencyV/Hz380/50
Service PowerKw/h54
3.Feature of mineral water cap compression molding machine:
A.Rotary muti compression molding process and advanced hydraulic system bring the highly stable and accurate production
B.Muti-cavity continuous high speed rotation, short cycle time, and high production efficiency
C.Low energy consumption in heating and cooling process.No hot runner, save energy effectively
D.No raw material wasted in spilling and hot runner circuit, Every single granule of raw material is fully used
E.Safe machine door interlock,emergency stop switch,rigid machine housing, U/L certified
D.Fully automatic in line production, no hand touching, avoid contamination
4.Machine Advantage:
Compared with injection moulding machine and other mineral water cap compression molding machine manufacturers,Jeepine’s plastic cap compression moulding machine have the following advantages:
Plastic cap Compression moulding technology as a well known technology around the world in plastic cap production.
A:Energy saving
Less Energy Consumption,Overall energy savings per cap can be as high as 45%.
Because plastic cap compression moulding machine need lower heating temperature,which means less energy consumption in both heating and cooling.
B.High specific density and less shrinkage
Equal molding pressure, lower molding temperature allows the result of a higher density. Furthermore, less heating and cooling temperature gap accomplish less shrinkage of caps.
C.Quick color changeover without hot runners,only the extruder and independent cool plus mould contact the material .
D.Shorter cycle time (2 seconds) and therefore higher productivity
Due to lower extrusion temperature, caps are more quickly to be cooled down in cool plus mould.It makes shorter cycle time, thus capacity rises.
E.Easy and flexible maintenance
Independent mould make it easier to change mould, only with hand tools but not crane.
F.Less material waste:much lower costs per cap.
5.Mold Advantage:
Compared with injection moulding machine and other mineral water cap compression molding machine manufacturers,Jeepine’s plastic cap compression moulding machine have the following advantages:
Plastic cap Compression moulding technology as a well known technology around the world in plastic cap production.
A:Energy saving
Less Energy Consumption,Overall energy savings per cap can be as high as 45%.
Because plastic cap compression moulding machine need lower heating temperature,which means less energy consumption in both heating and cooling.
B.High specific density and less shrinkage
Equal molding pressure, lower molding temperature allows the result of a higher density. Furthermore, less heating and cooling temperature gap accomplish less shrinkage of caps.
C.Quick color changeover without hot runners,only the extruder and independent cool plus mould contact the material .
D.Shorter cycle time (2 seconds) and therefore higher productivity
Due to lower extrusion temperature, caps are more quickly to be cooled down in cool plus mould.It makes shorter cycle time, thus capacity rises.
E.Easy and flexible maintenance
Independent mould make it easier to change mould, only with hand tools but not crane.
F.Less material waste:much lower costs per cap.
6.Application: Beverage, Food, Medical, Plastic cap, water cap, beverage cap,CSD cap and mineral water cap compression molding machine
7.Package and transportation of mineral water cap compression molding machine:
The goods are shipped with container in the seaworthy vessel and suitable for export packaging
8.FAQ:
A.what is the process for making mineral water cap compression molding machine?
Main machine-Cap cooler-Cap sorter-Cap slitter-Cap package
B. how far from the baiyun airport to your compression moulding factory?
1 hour
C. how long to make the whole machine?
3 month for whole cap compression moulding machine
9.Product certification:ISO9001, UL
10.Function:Cap compression machine for bottle cap productionCompression Molding Machine China
website:http://www.capmakingmachine.com/compression-molding-machine/

활동 지역

http://www.banzanpolymer.com/

이름(실명)

damimi721

© 2019 theMixSchool.com.
All rights reserved.

BLUESONO 대표자: 장호준 | 개인정보책임관리자: 안민선 | 사업자번호: 806-10-01459 | 통신판매업 신고번호: 00-0000 | 주소: 경기도 고양시 일산서구 하이파크로 113 아이파크1단지 104-901 | 전화번호: 010-7700-3874 | 이메일: admin@themixschool.com

개인정보처리방침

Setup Menus in Admin Panel